Please select an image from below to see detailed information about the product.  By placing your cursor over an image, you will see a product name appear.  You can see more products by scrolling to the left or right with the arrows provided.

Waveguide Ladder

Waveguide ladders provide a means of supporting feedlines on a rigid platform that can be mounted to the face of any tower. Holes are provided to accommodate snap-in waveguide hangers. All items are hot-dip galvanized. All necessary hardware for attaching the ladders to tower face is furnished. Snap-in hangers not included.

T-Shape Waveguide Hanger

Waveguide Hangers attach to the legs of either guyed or self-supporting towers and accept up to 24 snap-in hangers. T-Hangers are attached to round legs with U-bolts for easy installation. Angle legs require custom manufacture. Specify angle size when ordering. Normal installation calls for approximate 4-foot vertical spacing. hangers are shipped with all required mounting hardware. Snap-in hangers are not included.

W-ShapeWaveguide Hanger

The W-shape hanger attaches to the tower leg for distribution of lines on either side of the tower apex. Waveguide hangers accept up to 24 snap-in waveguide clamps. Hangers are attached to round legs with U-bolts for easy installation. Angle legs require custom manufacture. Specify angle size when ordering. Normal installation calls for approximate 4-foot vertical spacing. hangers are shipped with all required mounting hardware. Snap-in hangers are not included.

Coax Hangers

Coax hangers attach coaxial cable to waveguide brackets. Universal snap-in hangers allow fast installation and fit 3/4" waveguide bracket holes. Available to fit common coax sizes. Stainless steel construction.

Butterfly Hanger

Coax hangers attach coaxial cable to waveguide brackets. Butterfly hangers bolt in to 3/8" holes, or fit round member straps. Available to fit common coax sizes. Stainless steel construction.

Round Member Standoff

Standoffs are available in 3/8" hardware, or with 3/4" holes to accept snap-in hangers.

Angle Adapter

Angle adapters are available with either a slotted screw; or with holes to accept snap-ins.

Bump Block

This bracket attaches to angle adapters, standoffs, etc with 3/8" hardware. One 7/16" hole and three 3/4" holes allow attachment of up to three transmission lines with snap-in hangers.

Entry Panels

Aluminum entry panels allow the entry of coax cables into buildings and shelters. The panels provide support for every run of coax and prevent moisture from entering the structure. Can be used both internally and externally. 4" standard ports. Wall mounting hardware and sealing caps included.

Entry Panel Boots

Entry panel boots allow simple clamping of coax to an entry panel port. Two standard size straps included, boot size fits 4"port and 4" cushion inserts. Designed to meet ASTM-D2000 and ASE J200 specifications.

Panel Port Cushion Inserts

Cushion inserts allow easy securing of smaller coax cables in a standard entry port boot. Can be fashioned for any size of panel and cable.

Cushion Insert Plugs

Cushion plugs fill unused holes in Cushion inserts.

Hoisting Grips

Hoisting Grips allow simple lifting of coaxial cable, and may be used to provide additional waveguide support on structures.

Ice Bridge

Ice bridge provides protection and support for coaxial cable on the ground. Can be designed for 1' or 2' widths and may support multiple levels of trapeze hangers.