Please select an image from below to see detailed information about the product.  By placing your cursor over an image, you will see a product name appear.  You can see more products by scrolling to the left or right with the arrows provided.

Roof Tripod

Non-penetrating roof tripods sit on flat roofs and are held in place by concrete or other weights. They may be used singly as shown, or grouped with cross-bracing in multiple units. The center supporting arm is 8-feet high. Galvanized steel weights may be ordered separately. Antenna mounting pipes must be ordered separately.

Roof Frame

Non-penetrating roof-sled, held in place by concrete or other weights. Used with a mounting gate to allow up to 3 antennas. Mounting pipes sold separately.

Water Tower Tripod

The water tower tripod provides a permanent base for any antenna requiring a 2 3/8" mounting pipe. The mount may be bolted to a water tower surface with the mounting plates, or serve as a non-penetrating structure and be bonded with epoxy. Like roof mounts, water tower tripods may be cross-braced in multiple units. Antenna mounting pipes must be ordered separately.

Water Tower Sectorized Mount

The sectorized mount for water towers allows the attachment of up to four antennas per 13' face. Supporting arms may be bolted to a water tower surface with the mounting plates, or serve as a non-penetrating structure and be bonded with epoxy.

Wall Mount

The wall mount provides a single round member for the attachment of antennas or dishes. The mount consists of a plate-pipe weldment and two back plates. connected by threaded rods. The mount may also be held to a solid wall with wedge anchor bolts.