Please select an image from below to see detailed information about the product.  By placing your cursor over an image, you will see a product name appear.  You can see more products by scrolling to the left or right with the arrows provided.

Low Profile Monopole Mount

A low-profile platform provides a reduced wind area and accommodates up to 12 antennas. Clamp-on brackets are required. Angle railing is available. Mounting pipes sold separetly.

15-foot Sector Mount

A sector mount for a monopole provides support for multiple cellular antennas at one monopole elevation. Mounting gates are supported on aesthetically pleasing curved arms attached to the pole either on existing mounting brackets, or on clamp-on brackets pictured. Curved arms and H-plates are included. Mounting pipes sold separately.

Straight Arm X-Pipe Mount

The straight arm x-pipe mount provides a very low wind drag mount, with an antenna capacity equal to larger sectorized mounts. The X-pipes are rotatable on the end of 3' or 6' straight arms. This flexibility to align sectors at increments other than 120 degrees makes the x-pipe mount highly versatile.

6-foot Monopole Curved Arm

Curved arms attach to the clamp-on mounting bracket, or directly to an EEI monopole if brackets are present. For other brands of poles and brackets, curved arms may need to be fitted to a custom bolt pattern. Each bracket accepts one antenna mounting pipe or two pipes. Mounting pipes not included.

Straight-arm Mounts for Monopoles

Straight-arm mounts provide separation of the antenna from the pole. Available in two lengths and includes end plate. Antenna mounting pipes sold separately.

Dish Mounts (Single Configuration)

A clamp-on dish mount is designed for round or 12 or 18 sided monopoles. The mount is available as shown with the single 4 1/2" OD by 5' long mounting pipe. Standard 8" stand-off bracket furnished with mount. Specify when a 12" stand-off bracket is required.

Dish Mounts (Double mount Configuration)

A clamp-on dish mount is designed for round or 12 or 18 sided monopoles. The mount is available as shown with the double 4 1/2" OD by 5' long mounting pipes. Standard 8" stand-off bracket furnished with mount. Specify when a 12" stand-off bracket is required.

Jacking Plate Weldment

Used for monopole assembly during the jacking process. Mounts to monopole wall on shop welded nuts. Mounting holes on standard, 30" spaced jacking nuts, and alternate 36" spaced nuts. Plate set consists of 4 jacking plate weldments.

Access Ports

Standard size black iron ports available for installation where feedline entry or exit is erquired. The 16" by 32" port is available with a galvanized hinged door. EEI recommends painting the ports with a zinc-rich paint after installation.

7" ports include internally welded J-hooks for hanging coax-hoisting grips.

16" ports are available with hinged door for use as personnel access. Includes welded lock tabs.